TEE Publishing Celebrating 50 years in 2011

Shopping Cart : 0 Items | £0.00 | Checkout

||
Phone us on 01926 614 101
Step 1     Step 2     Step 3

Casting and Foundrywork for the Amateur

Please view Our Books below.

Showing 1-10 of 12 title(s):

View all

Backyard Foundry

By B. T. Aspin

This book covers basic principles, materials and techniques, pattern-making, moulding boxes, cores and core boxes, metals, electric, gas and coke furnaces. Step-by-ste...

£7.95 (P&P £1.95)

Brass And Alloy Founding

By H B Maynard

A concise book with Part 1 covering the metals and alloys, whilst Part 2 covers commercial furnaces.

£5.50 (P&P £1.55)

Build a Muller

By Steve Chastain

Properly preparing enough sand for moulds can be a real chore. The author shows how to build a professional grade foundry muller to take the work out of making mouldin...

£16.95 (P&P £1.95)

Foundrywork For The Amateur

By B. T. Aspin

A detailed book on mould and pattern making and pouring metals to produce castings for model making or other purposes.

£7.95 (P&P £1.55)

Iron Melting Cupola Furnace: For The Small Foundry **

By Steve Chastain

Complete plans and operating instructions for a 10" diameter cupola furnace which will melt 330 pounds of iron per hour, along with plans for a high-pressure blow...

£16.95 (P&P £1.95)

Making Crucibles

By Gingery

This book on making your own furnace so that you can melt metal, but all of these books assume you will purchase a crucible for use with the furnace. As most of these ...

£7.50 (P&P £1.55)

Making Pistons For Experimental & Restoration Engines

By Steve Chastain

Full instructions for designing and making pistons and piston rings for new or old engines. Includes advice on making all the tools and jigs needed for the job. Good f...

£13.95 (P&P £1.55)

Metalcasting: A Sand Casting Manual For The Small Foundry Vol. 1 **

By Steve Chastain

Shows the beginner how to cast metal in sand moulds using simple techniques and readily available materials, showing how to make a sand mould and produce high quality ...

£16.95 (P&P £1.95)

Metalcasting: A Sand Casting Manual For The Small Foundry Vol. 2 **

By Steve Chastain

This describes more advanced techniques. Shows how to cast metal in sand moulds using simple techniques and readily available materials, how to make rubber moulds and ...

£16.95 (P&P £1.95)

Pattern Making

By F. J. Camm

First published in 1930 as part of encyclopaedia this small booklet contains a wealth of information on how to produce your own patterns.

£3.95 (P&P £1.15)

Showing 1-10 of 12 title(s):

View all